CST CentriX-22 Semi-Auto Receiver W/ Power Match Bolt Sub-Kit

DSCN0217.JPG
DSCN0219.JPG
DSCN0218.JPG
DSCN0213.JPG
DSCN0217.JPG
DSCN0219.JPG
DSCN0218.JPG
DSCN0213.JPG

CST CentriX-22 Semi-Auto Receiver W/ Power Match Bolt Sub-Kit

299.95

The CST CentriX-22 Rimfire Receiver provides the same superior quality as our Titan 22's, but with an integral rail and reinforced tang area for excellent rigidity and a distinctive look.  Simplicity in design with the same precision and attention to finish that make our actions the best choice for your next build. Offered here as a “sub-kit”, including the Power Match Bolt and Power Extended Bolt Handle.

Available black or silver with flat integral picatinny rail.  Drop-in design fully compatible with factory or aftermarket stocks, barrels, trigger assemblies, bolts, and barrel clamps.  Also Includes trigger cross-pins and a rear tab for rear action screw installation.  Rear tab can be removed for drop-in use. 

Special bedding is only required if the rear action screw is to be used. To facilitate the installation of the rear action screw in the stock, recommended to purchase the CST Rear Pillar Set which will include the extra action screw, (sold separately).

PRICES:
CST CentriX-22 Semi-Auto Receiver with Power Match Bolt and Charging Handle, (black or silver): SALE: $284.95

IMPORTANT FFL INFORMATION:

Upon Purchase, please forward contact information of a Federal Firearm Licensee (FFL) in your area.  Be advised, the website will process your order regardless of the ship-to address entered, however this item can only be shipped to an FFL holder in your area. The FFL Holder is required to forward a signed and dated copy of their license via email before shipping can take place.  Our email is:  sales@cstmtech.com

Color:
Quantity:
Add To Cart

Each CST CentriX-22 is CNC machined from aerospace grade 6061-T6 aluminum billet to stringent tolerances and protected by hard anodize, (clear or black is available). 

Also features a removable cap to allow barrel cleaning from the rear, and proper clearance built in for the Grand Master Trigger spring assisted magazine release.

Both a short and long version rear threaded tab are available, both using #12-24 threads.  The short threaded tabs are standard.  Distance from the center-of-hole to the rear face of the receiver is .271" for the short, and .326" for the long.  Please specify if the longer version threaded tab is needed.