CST CentriX-22 Semi-Auto Receiver Assembly Kit

DSCN0226 cmprssed.jpg
DSCN0230 cprrsed.jpg
DSCN0235 cmprssd.jpg
DSCN0240 cmprssd.jpg
DSCN0226 cmprssed.jpg
DSCN0230 cprrsed.jpg
DSCN0235 cmprssd.jpg
DSCN0240 cmprssd.jpg
sold out

CST CentriX-22 Semi-Auto Receiver Assembly Kit

from 529.95

The CST CentriX-22 Rimfire Receiver packaged in “kit” form for maximum savings. The CST CentriX-22 provides the same superior quality as our Titan 22's, but with an integral rail and reinforced tang area for excellent rigidity and a distinctive look.  Simplicity in design with the same precision and attention to finish that make our actions the best choice for your next build.

The “Kit” comes complete with the Power Match Bolt, Power Extended Charging Handle, and the Grand Master Trigger Assembly (available with CST 2nd Generation Auto Bolt Stop pre-installed or with standard auto-bolt release). Patented Spring Ejected Magazine feature is incorporated in the Grand Master Trigger Assembly with correct clearances built into the receiver.  Also includes Barrel Clamp Set with screws, Stainless Action Screw and necessary cross-pins. Rear Threaded Tab for rear action screw is included and can be removed for drop-in use. 

Available black or silver with flat integral picatinny rail.  Drop-in design fully compatible with factory or aftermarket stocks and barrels. Special bedding is only required if the rear action screw is to be used. To facilitate the installation of the rear action screw in the stock, recommended to purchase the CST Rear Pillar Set which will include the extra action screw, (sold separately).

IMPORTANT FFL INFORMATION:

Upon Purchase, please forward contact information of a Federal Firearm Licensee (FFL) in your area.  Be advised, the website will process your order regardless, however this item can only be shipped to an FFL holder in your area. The FFL Holder is required to forward a signed and dated copy of their license via email before shipping can take place.  Our email is:  sales@cstmtech.com

Color:
Trigger Option:
Add To Cart

Each CST CentriX-22 is CNC machined from aerospace grade 6061-T6 aluminum billet to stringent tolerances and protected by hard anodize, (clear or black is available). 

Also features a removable cap to allow barrel cleaning from the rear, and proper clearance built in for the Grand Master Trigger spring assisted magazine release.

Both a short and long version rear threaded tab are available, both using #12-24 threads.  The short threaded tabs are standard.  Distance from the center-of-hole to the rear face of the receiver is .221" for the short, and .326" for the long.  Please specify if the longer version threaded tab is needed.