CST CentriX-22 Semi-Auto Receiver

DSCN0212 cprssed.jpg
DSCN0212 cprssed.jpg

CST CentriX-22 Semi-Auto Receiver

from 169.95

The CST CentriX-22 Rimfire Receiver provides the same superior quality as our Titan 22's, but with an integral rail and reinforced tang area for excellent rigidity and a distinctive look.  Simplicity in design with the same precision and attention to finish that make our actions the best choice for your next build.

Available black or silver with flat integral picatinny rail.  Drop-in design fully compatible with factory or aftermarket stocks, barrels, trigger assemblies, bolts, and barrel clamps.  Includes trigger cross-pins and a rear tab for rear action screw installation.  Rear tab can be removed for drop-in use. 

Special bedding is only required if the rear action screw is to be used. To facilitate the installation of the rear action screw in the stock, recommended to purchase the CST Rear Pillar Set which will include the extra action screw, (sold separately).

The CentriX-22 Receiver can also be purchased in kit form. The “sub-kit” includes the Power Match Bolt and Power Extended Bolt Handle, and the “full-kit” version is our “everything but the stock and barrel” version.

CST CentriX-22 Semi-Auto Receiver, (black or silver): SALE: $154.95


Upon Purchase, please forward contact information of a Federal Firearm Licensee (FFL) in your area.  Be advised, the website will process your order regardless of the ship-to address entered, however this item can only be shipped to an FFL holder in your area. The FFL Holder is required to forward a signed and dated copy of their license via email before shipping can take place.  Our email is:  sales@cstmtech.com


Power Match Bolt and Bolt Handle Upgrade:
Add To Cart

Each CST CentriX-22 is CNC machined from aerospace grade 6061-T6 aluminum billet to stringent tolerances and protected by hard anodize, (clear or black is available). 

Also features a removable cap to allow barrel cleaning from the rear, and proper clearance built in for the Grand Master Trigger spring assisted magazine release.

Both a short and long version rear threaded tab are available, both using #12-24 threads.  The short threaded tabs are standard.  Distance from the center-of-hole to the rear face of the receiver is .271" for the short, and .326" for the long.  Please specify if the longer version threaded tab is needed.